A flat roof extension is only as watertight as the line where it meets the existing house. Caerphilly has plenty of terraces and post-war houses with rear kitchens and side additions, and the old wall behind them is rarely perfectly straight or sound. Getting that junction right matters more than the choice of covering across the middle.
Starting with the existing wall
Before anything is fixed, we look at what the roof will meet. Older terrace walls may be stone, brick or rendered, and post-war houses often have cavity brick. Loose pointing, crumbling render or a damp patch will undermine any flashing, so the wall is made good first. A sound surface is what the waterproofing will rely on.
Where an old rear wall has been rendered or painted over, we check whether the finish is still bonded. Flashing fixed into failing render will not last, so we cut back to sound material and agree with you what needs repairing before it is covered up.
The upstand and the flashing
The covering is turned up the wall as an upstand, high enough to stop rain splashing over it. Above that, a lead or approved flashing is chased into the masonry and sealed, so water running down the wall is thrown clear of the join. EPDM and GRP are formed up the wall in one piece, while felt needs careful laps.
- Upstand turned up the wall, with the height checked on site.
- Flashing chased into a mortar joint, not just stuck on.
- Cavity trays or damp proofing where the wall is hollow.
- Corners and ends formed as continuous details.
Falls, outlets and where water goes
A flat roof is never truly flat. The deck is laid to a gentle fall so water travels away from the house wall towards a gutter or outlet. Standing water against the join is a common cause of leaks, so we plan the slope before the boards go down. Downpipes should discharge to a proper drain, not onto the neighbour's side.
Outlets and gutters need to be sized and placed so that heavy rain from the hillside storms does not overwhelm them. We keep them clear of the wall line, and leave access so they can be cleaned from the ground when needed.
Structure, insulation and ventilation
The extension roof is tied to the house by joists that rest on a wall plate fixed to the main wall, and the details must carry the roof loads. Insulation sits on or between the joists, depending on the build up, and ventilation or a vapour control layer is planned to stop condensation. These parts are hidden, but they decide how the roof behaves.
What to ask and what to expect
Ask to see how the wall junction will be formed, how the water is taken away, and what the finished upstand will look like. A new extension may need planning or Building Regulations checks — we advise before work starts. How long the roof takes depends on its size and the weather, and we will talk through the sequence.
Get a Free Flat Roof Quote in Caerphilly
Flat Roofing South Wales provides free, no-obligation quotations in Caerphilly and the surrounding area.
Call 07766 547309More Flat Roof Guides for Caerphilly
Flat Roof Questions Answered
Why do extension roofs so often leak where they meet the house?
The join relies on flashing, an upstand and a sound wall behind them. If the wall is crumbling, the flashing is only surface sealed, or water pools against the junction, rain finds a way in. In Caerphilly, older rear walls are common culprits.
Can a flat roof extension be joined to a stone or terraced wall?
Yes. We check the stone or brick first, repair loose pointing, then chase the flashing into the wall properly. The structure is also checked where needed, because terrace walls vary and the fixing method has to suit what is there.
Which covering suits an extension joined to the house?
EPDM and GRP both work well, because they form up the wall without joins, while felt can also be used with careful detailing. We choose after seeing the roof size, shape and junctions, and we explain the reason to you.