GRP, or glass reinforced plastic, is laid on site as liquid resin over fibreglass matting, then topcoated. It sets into a single seamless surface. Many homeowners in Barry ask about it because salt air and wind are hard on other coverings. It often works well, but the answer depends on the deck beneath and the shape of the roof.
What GRP actually is
A GRP roof is built in layers. Resin and glass fibre matting are applied over a prepared deck, then a finishing topcoat goes on, usually in a colour chosen by the customer. When it cures it is hard, with no overlaps or open seams. That absence of joints is the main reason it is liked on garages, porches and small extensions, where a neat finish and simple shapes make it practical.
How it copes with sea air and wind
Salt-laden air does not rot fibreglass the way it can attack some metals and fixings, and the continuous skin gives wind nothing to get under in the middle of the roof. The edges and trims still need to be formed well, because that is where wind pressure is highest. Near Barry Island or along the front, we pay special attention to how the perimeter is finished.
Where GRP suits and where we hesitate
GRP is rigid, so it needs a firm, stable deck. It tends to suit smaller roofs with simple shapes and good support. We would think harder before using it where the structure moves a great deal or the boards are poor. On large or flexing roofs, a rubber membrane like EPDM may be the better answer, because we do not say one covering is right for everyone.
- Small garages, porches and dormer flats often suit it well
- Sound, dry boarding is essential before resin goes on
- Movement between old and new structures needs careful design
- Large spans may favour a flexible membrane instead
Weather and preparation
GRP is sensitive to damp and cold at the time it is laid. Resin will not cure properly on wet boards or in poor conditions, so we choose a dry spell and keep the deck covered until work starts. Barry weather can change quickly, and we would rather wait than lay it badly. Timing depends on the size of the roof and the forecast, and we explain that before we begin.
Questions to ask before you choose
Ask what the deck is made of and whether it needs replacing. Ask how the edges will be finished, how upstands against walls will be handled, and how outlets and falls will drain water. A proper quote should come after a survey, not before one. We look at the roof first, then say whether GRP, EPDM or felt makes most sense for the property.
Get a Free Flat Roof Quote in Barry
Flat Roofing South Wales provides free, no-obligation quotations in Barry and the surrounding area.
Call 07766 547309More Flat Roof Guides for Barry
Flat Roof Questions Answered
Will salt air damage a GRP roof in Barry?
Fibreglass resists salt air well, and the seamless surface gives wind little to catch. The weak points are edges, trims and any damaged deck underneath, not the GRP itself. We check those details first, especially for roofs close to the seafront.
Is GRP better than EPDM for a garage near the coast?
Neither is right for every garage. GRP suits a firm deck and a simple roof shape, while EPDM copes well with larger or less rigid roofs. We survey the garage and explain which suits it, rather than recommending one by default.
Can GRP go over my old felt roof?
Sometimes, but not always. Old felt that is damp, bubbled or loose usually has to come off, along with any rotten boards. We open up a small area to see what is underneath before deciding how the new roof should be built.