People often ask which flat roofing material is the right one, and the honest reply is that it depends on the roof. A simple rectangular garage and a dormer with several corners ask different things of a covering. In Cwmbran, where flat roofs sit on so many garages, porches and rear extensions, the choice comes down to a few clear questions.
EPDM rubber
EPDM is a synthetic rubber supplied in large sheets, so a simple roof can be covered with very few joins. It is flexible, copes with movement and suits plain rectangular shapes such as garages and single-storey extensions. It is less comfortable on roofs with lots of small penetrations, curves or tight details, where more joins and trims are needed.
GRP fibreglass
GRP is laid on site as liquid resin and glass matting, then topcoated, leaving a seamless, hard surface. That makes it a good fit for awkward shapes, dormers, small balconies and roofs with many corners. It needs a firm, dry, stable deck, and it is less forgiving if the structure underneath moves, so deck condition counts. It is also a good choice where a roof is regularly stepped on for maintenance, once properly finished.
Felt
Modern felt systems, usually layered and heat or torch applied, are a familiar and proven option. They suit many shed, garage and extension roofs and can be a sensible choice where a conventional look is wanted. Detailing at joints and edges matters a great deal, and we are careful with fixing method and fire safety on site. Felt can also be a sensible match where an adjoining roof is already felt and a consistent finish is wanted.
What we check before recommending
The material is only part of the answer, and a roof is judged by its details as much as its surface. On a survey we look at the following, because each point can change which system makes sense for your particular roof and how we would build it up.
- Size, shape and the number of corners, upstands and pipes.
- Condition and type of the deck underneath.
- Falls and where water currently collects.
- Whether the roof is walked on or has anything fixed to it.
- Access, exposure to wind and shelter from neighbouring houses.
Matching it to your roof
Exposed spots such as Upper Cwmbran or the edges of Thornhill see more wind and rain than sheltered streets, which matters for edge fixing. We explain our reasoning, show you the options and leave the decision with you. Any work may need planning or Building Regulations checks — we advise before work starts.
Get a Free Flat Roof Quote in Cwmbran
Flat Roofing South Wales provides free, no-obligation quotations in Cwmbran and the surrounding area.
Call 07766 547309More Flat Roof Guides for Cwmbran
Flat Roof Questions Answered
Is rubber or fibreglass better for a Cwmbran garage roof?
Neither wins every time. For a plain rectangular garage, rubber in one sheet is often neat and straightforward. If the garage has an odd shape, upstands or lots of details, fibreglass may suit better. We look at the roof and explain which we would fit.
Can I put a new system over my old felt?
Sometimes, but not always. Old felt may be wet underneath, blistered or covering a rotten deck, and sealing that in causes trouble later. We lift a test area on site, check what is below and tell you whether stripping is the sounder route.
Does the system choice affect insulation?
It can. The covering itself does little for warmth, so insulation is a separate build-up decision, especially on extensions and dormers where rooms sit below. We discuss whether to add it while the roof is open, as that is the easiest moment.