A damp patch above a bay window or a drip inside the porch is a familiar problem in Victorian and Edwardian streets around Pontcanna, Canton and Heath. These small roofs take a lot of weather for their size, and the fault is often in one spot rather than the whole surface. Here is how to limit the damage and what a sound repair looks like.
What to do the moment you notice a leak
Start inside. Move furniture and belongings away from the drip, put a bowl or bucket underneath, and lay towels to protect the floor. If the ceiling is bulging with trapped water, a small hole made carefully can let it drain into a bucket, but keep clear of any lights or electrical fittings. Do not go onto the roof to look or to patch it yourself. Small flat roofs over bays are fragile and often slippery. Call us and we will survey it safely.
Where bay and porch roofs usually fail
The usual culprits are at the edges. A bay roof has several angled corners, and each one is a place where the covering can lift or crack. The junction with the main wall is another weak point, because the flashing there can loosen or the pointing behind it can crumble. Porches suffer where the roof meets the front door frame, and where the small gutter or outlet blocks with leaves and silt.
Signs you can spot from the ground
You can learn a good deal without leaving the pavement or garden. Look up from the ground, with binoculars if you have them, and note anything obvious, then check indoors for clues about where the water is getting in. Never step onto the bay or porch roof to take a closer look. Write down what you see so we can compare it with what we find on the survey. Useful things to note are listed below.
- Stains on the ceiling that spread after heavy rain
- Overflowing or sagging gutters directly above the bay
- Moss, plants or debris showing at the roof edge
- Bubbling or peeling paint around the window head
- Any damp smell in the porch or bay room
How we trace and repair the fault
We inspect the covering, the upstands, the edge trims and the outlet, then trace the water path back from where it appears inside. Local repairs are possible when the material is sound: a patch of rubber or fibreglass, a refixed flashing, or new sealant at a failed joint. If the deck beneath is damp or soft, we cut back to firm timber, dry it out, replace what is needed and then re-cover. Covering over wet boards simply traps the problem.
When a patch is not enough
Sometimes the leak is a symptom of an old covering that has hardened, cracked and shrunk across the whole roof. Repeated patching then costs more effort than it saves. We tell you honestly when a repair makes sense and when recovering the roof in EPDM, GRP or felt is the better route. Bay roofs with lead flashings need particular care, and we assess those on site before deciding anything.
Get a Free Flat Roof Quote in Cardiff
Flat Roofing South Wales provides free, no-obligation quotations in Cardiff and the surrounding area.
Call 07766 547309More Flat Roof Guides for Cardiff
Flat Roof Questions Answered
Can I seal a leaking porch roof myself with a tub of roof sealant?
We would rather you did not. Sealant applied to a wet or dirty surface rarely holds, and it can hide the real fault. Getting onto a small porch roof is also a fall risk. Contain the drip indoors and call us for a proper survey.
Why does my Cardiff bay leak only in strong wind and rain?
Wind-driven rain pushes water sideways into joints and gaps that stay dry in gentle weather. That points to a failing flashing, a lifted edge or a cracked joint rather than a general hole in the covering. We trace it by looking at exactly where the stain appears.
Will fixing the roof also deal with the damp inside?
Stopping the water is the first step, but the damp inside needs time to dry. Soaked plaster or timber may need drying or replacing afterwards. We look at the extent of the damage when we survey, and tell you what is repairable and what is not.