Google 4.9/5 · 21 reviews
T&T RoofingSouth Wales07766 547309
UPVC fascias and soffits in South Wales from T & T Roofing: installation, replacement and repairs
UPVC Soffit and Fascia — Porthcawl

UPVC Fascias, Soffits and Guttering for Porthcawl Homes

T & T Roofing South Wales replaces fascias, soffits, bargeboards and gutters with UPVC on Porthcawl's seafront terraces, 1930s houses, holiday lets and newer estates.

UPVC Soffit and Fascia › Porthcawl

Porthcawl takes the sea wind full on, and the salt it carries is hard on timber boards and tired gutters. Along the seafront and out towards Rest Bay, a roofline that was fine in a sheltered street can start to fail quickly. UPVC is a sensible answer, since it does not rot and is cleaned rather than painted.

We cover Porthcawl, Nottage, Newton, Pyle, Kenfig Hill, Cornelly and the surrounding area. Every job starts with an honest look at what is up there: the boards, the rafter ends, the eaves and the guttering. We explain what needs to go, what can stay, and what the sensible options are.

Call 07766 547309 about upvc soffit and fascia in Porthcawl, or message us on WhatsApp.

Roofline work on Porthcawl's housing

Seafront terraces face the full weather, and the gable ends and eaves bear the brunt of gusts and spray. Timber fascias here are repainted often and still fail at joints and behind gutters. New UPVC boards, fitted with proper fixings and allowance for movement, are far less demanding. Streets beyond the front, such as those towards Newton, are calmer but still feel the wind.

Many 1930s houses in and around Porthcawl have deep eaves and original timber soffits that have been painted many times. Before we disturb them we check what the existing boards are made of. Newer estates around Newton and Nottage usually have thinner plastic boards that have simply worn out. Both kinds of board are dealt with the same way once we see them close up.

Holiday lets are a particular case. Owners want the roofline sorted in one visit between bookings, with a clean finish and no repeat painting. We plan the access and the order of work so the job is tidy, and agree a clear scope before the scaffold goes up. We also tell you plainly what the roofline needs, so you only pay for work the house requires.

A rotted timber fascia board at the roof edgeFascia and soffit boards at the edge of a pitched roof

UPVC roofline jobs in Porthcawl

  • Full fascia and soffit replacement — Old boards and guttering come off, the rafter ends and eaves are checked, and new UPVC fascias and soffits go on along the full roofline.
  • Bargeboards on exposed gables — New UPVC bargeboards on gable ends that catch the sea wind, fixed firmly and finished tidily at the ridge and eaves corner.
  • Vented soffits and vent strips — Ventilation built into the soffit so the loft can breathe, which matters in salty, humid coastal air that lingers around the roof.
  • Gutter replacement alongside — New guttering and downpipes fitted to the fresh fascia at the correct fall, so spray and heavy rain are carried away cleanly.
  • Capping over sound boards — Where the old timber is solid and square, UPVC cover boards can be fitted over it, subject to what we find on a close check.
  • Repairs and partial replacement — A split corner, a failed length or a loose bargeboard can be repaired without renewing the whole house front.

How we work on a Porthcawl roofline

We plan access first, usually with scaffold or similar, because boards cannot be fitted properly from a ladder in a sea breeze. We look closely at rafter ends and the eaves behind the old boards, since salt and damp tend to attack them where they are hardest to see. Bargeboards and gable edges get the same close attention as the front eaves.

We agree the finish with you, white or a darker or wood-effect colour, and explain how the new boards, vents and gutters will be arranged. Some work may need planning or Building Regulations checks, and we advise before work starts. You get a clear scope before work begins.

UPVC Soffit and Fascia Guides for Porthcawl

UPVC Soffit and Fascia in Porthcawl — Common Questions

Is UPVC suitable for houses close to the sea?

It is a good fit for Porthcawl. It does not rot, does not need repainting and wipes clean of salt. The fixings, joints and gutter brackets still need to be sound, so careful installation matters as much as the material.

Can you work around holiday-let bookings?

We can agree a plan that suits your calendar. Scaffold, removal and fitting are programmed so the roofline is finished in one go, and we tell you in advance what to expect on site.

Which colours are available?

White is the common choice, with darker and wood-effect finishes also available. On seafront houses the choice often depends on the windows and the rest of the street. We can talk through what suits your property.

Do 1930s houses need anything different?

Older houses often have deeper eaves and original timber soffits. We check what the existing boards are made of before they are disturbed, and plan the removal and replacement around what we find.

Will you replace the gutters as well?

Usually the gutters have to come off to reach the boards. Many owners choose new guttering at the same time, which saves a second visit. If your existing gutters are sound, we will tell you.

More Roofing Help in Porthcawl

Nearby Towns

Contact T&T Roofing in Porthcawl

We cover Porthcawl and the area around it including Nottage, Newton, Pyle, Kenfig Hill, Cornelly.

Free quotations

Tell us what the roof is doing in Porthcawl and we will look at it. Call 07766 547309, message us on WhatsApp or use the form below.

UPVC Soffit and Fascia Across South Wales