Google 4.9/5 · 21 reviews
T&T RoofingSouth Wales07766 547309
VELUX window installation in South Wales from T & T Roofing
VELUX Window Installers — Barry

Roof Windows for Barry Lofts and Extensions

We fit VELUX and similar roof windows in Barry homes, matching the flashing to your roof covering and finishing the opening inside so the loft room stays light and dry.

VELUX Window Installers › Barry

A roof window can turn a dark loft into a usable room, and in Barry there are plenty of lofts worth the effort. Edwardian terraces and interwar semis often have good roof space sitting unused. The window has to be set into the roof properly, with the right flashing, a framed opening and sound insulation around it, or it becomes a source of leaks and condensation.

We fit VELUX and similar roof windows across Barry, Barry Island, Cadoxton, Palmerston, Gibbonsdown and Merthyr Dyfan, and in Sully, Rhoose and Dinas Powys. We can supply the window or fit one you have bought, and we check the roof covering, the rafters and the loft layout before we agree anything with you.

Call 07766 547309 about velux window installers in Barry, or message us on WhatsApp.

Roof windows on Barry houses

Barry's Edwardian and interwar roofs vary a lot. Some are slate with fine laps, some have been re-covered in concrete tiles, and some have a mixture from past repairs. The flashing kit must match the covering, so we confirm exactly what is on your roof before choosing it. A kit made for the wrong tile profile is a leak waiting to happen.

Weather on the Bristol Channel is a real test for a roof window. Driving rain from the south-west, salt in the air and strong gusts all work on the seals and flashing. We take care with the sealing at the sides and head, and we make sure the window sits where the rafters allow, so the frame is fixed firmly rather than relying on sealant alone.

Inside, the opening needs rafters trimmed and doubled where required, which we check on site, plus lining, insulation and a vapour control layer round the frame. On older Barry terraces the loft space can be tight, so we plan the position with you for headroom and the view. It may need planning or Building Regulations checks, and we advise before work starts.

Roof window work in Barry

  • New roof window in a slate roof — We cut in a roof window with a matched slate flashing kit, working with the existing laps so the covering around the opening stays sound.
  • New roof window in a tiled roof — A roof window in a concrete or clay tile roof gets the flashing kit made for that profile, with tiles cut and bedded neatly around it.
  • Loft conversion roof windows — For a loft being turned into a bedroom or study, we fit windows at sensible heights for light and escape, working alongside the wider conversion.
  • Replacing an old roof window — An old or damaged window can be taken out and replaced with a new unit and flashing kit that suits the roof as it is now.
  • Lining, insulation and finishing — We insulate and line round the opening, with a vapour control layer, so the room stays warm and condensation is kept off the frame.
  • Re-flashing a leaking roof window — Where a window leaks at the flashing, we strip the surround, check the covering, and re-flash or replace as the roof needs.

How we fit a roof window in Barry

We start in the loft. We look at rafter spacing, any purlins or ties, insulation and the pitch, and we look at the roof covering from the ground. That tells us the best position and the kit needed. We then explain what the opening will involve inside the room, including dust protection and where the lining will finish.

On the day the covering is opened up, the rafters are trimmed and doubled where needed, the window is set and fixed, and the flashing is built into the tiles or slate. Insulation and lining follow. We will tell you if anything we find, such as tired timber or poor covering, changes the plan before we carry on.

VELUX Window Installers Guides for Barry

VELUX Window Installers in Barry — Common Questions

Can you fit a VELUX window into a slate roof in Barry?

Yes. Slate roofs need a flashing kit made for slate and careful cutting round the opening, which we do on a regular basis. We look at the condition of the slate first, because tired slate around a new window causes trouble later.

Does a new roof window need rafters cut?

Usually the opening sits between rafters, and one or more may need trimming and doubling up around it. We check this on site, because the spacing in older Barry roofs is not always even, and we explain what is needed before starting.

Will a roof window leak in Barry's weather?

A properly flashed window should not. Most leaks trace back to the flashing, the sealing or the covering around the window, not the glass. Strong wind-driven rain off the Channel makes careful fitting matter, and that is where we spend our time.

Do you supply the window or fit one I have bought?

Either. We can supply a VELUX or similar roof window with the right flashing kit, or fit one you have already bought. We would want to see the model so we can confirm the flashing kit matches your roof covering.

Which areas around Barry do you cover?

We cover Barry, Barry Island, Cadoxton, Palmerston, Gibbonsdown and Merthyr Dyfan, plus Sully, Rhoose and Dinas Powys. Tell us where the house is and we will let you know honestly whether we can fit it in.

More Roofing Help in Barry

Nearby Towns

Contact T&T Roofing in Barry

We cover Barry and the area around it including Barry Island, Cadoxton, Dinas Powys, Sully, Rhoose.

Free quotations

Tell us what the roof is doing in Barry and we will look at it. Call 07766 547309, message us on WhatsApp or use the form below.

VELUX Window Installers Across South Wales